Custom Gun Alterations

How to Spot a Fake Sig Sauer Romeo 5

There are some pretty sophisticated fake and counterfeit Sig Romeo 5 red dot optics out there. We’ll should you how to identify a fake. Grab you magnifying glass.

Free Fix: Ruger 10/22 Auto Bolt Release Using Factory OEM Parts

Today we’ll show you how to fix the Ruger 10/22 bolt release so it automatically releases when the bolt is pulled back from the locked position [as God intended it to]. We will do it using the factory parts… IE

Glock Brass to Face [BTF] & Erratic Ejection Diagnosis and Repair: Extractor, Ejector & Recoil Spring Examination

Today, we’ll take a look at Glock erratic ejection issues and brass to face [BTF] or brass in face [BIF] ejection problems. We’ll show you specific areas to look at while diagnosing and fixing these issues. We will show you

Hope or Hype? In-Depth Review: Ruger Precision Rimfire .22LR

Today, we’ll be taking a close-up look at the Ruger Precision Rimfire, and this is the model 8400. We’ll pick apart some of the features, do some accuracy testing, we’ll show you some chrono results, we’ll discuss the pros and cons of the platform, and we’ll shoot it out to 200 yards to see how it does for practical use.

DIY Talon-Style Grips-Part 2: Shotguns and Rifles

Here is the link for the grip tape we used in this video: https://amzn.to/2YdozMy This DIY video will show you how to make homemade Talon-style grips for your polymer shotgun or rifle stock out of readily-available rubberized grip tape. This

Glock Trigger Job – Lighter, Smoother and More Crisp with Factory Parts

This video tutorial will guide you on how to do a trigger job on a Glock pistol to improve the trigger quality, reduce pull weight, remove grittiness and slop in the take-up , create a crisp break and make a

AR-15 Mil-Spec Trigger Job: Stoning and Spring Swap

This video demonstrates the correct [and cheap] way to perform a trigger job on an AR-15 with a standard mil spec trigger. It will guide you through the “what and where” of properly stoning the fire control group [FCG] components with an armorers stone. It also provides a detailed how-to on swapping out the hammer / trigger / disconnector springs for a lighter set using the JP Enterprises Reduced Power Spring Kit [3.5lb].

Tandemkross Blast Shield For Ruger MK IV: Does It Work???

This video shows how a Ruger MK IV 22/45 LITE functions with the Tandemkross Blast Shield installed.

Fixing Savage Rascal Light Primer Strikes

This post was compiled to address the incessant light primer strikes that plague the Savage Rascal .22 LR, an otherwise good firearm. This condition is caused by a combination of two firing pin design defects: 1. An excessively wide rim

Buyer Beware: Fake Magpul Hardware

Most of us are aware of people selling fake Asian-made knock-off’s or copies of legitimate name-brand products. This is nothing new. Some can be well-made and carry a much lower price tag, making them a decent value. However, there has

In Review: Adams Arms 5.56mm MOE Carbine Piston Upper

I can honestly say that I never experienced any real problems with the gas impingement system of the Stoner design. However, I quickly learned to dread the filth that would become of my BCG after even a short range session. I felt as though I was spending more time scrubbing carbon than flinging lead.