Hi folks, today we’ll take a look at an awesome little 9mm AR pistol, the Freedom Ordnance FX-9… this is the 8” pistol version. We’re going to show you an overview of the key features as well as looking at
Today we’ll take a look at a mil spec 12 gauge workhorse, the Mossberg 590A1 Tactical 7-shot Ghost Ring [6+1 of 2 3/4” or 5+1 of 3”] Model #50774. We’re going to show you an overview of the key features
WARNING: Some ammo was injured in the making of this video! Not for the faint of heart. Lets torture some 9mm Luger [9x19mm] by exposing it to multiple cycles of extreme heat and cold. Then, lets go to the range
Can you really get .357 Magnum velocity and energy from a 9mm Luger [9x19mm]? Well, the short answer is “yes, but it depends”. Today, we will chrono the 9mm loads listed below out of two relatively long-barreled pistol platforms [Freedom
Today we will be taking a look at a cool little accessory for the AK lovers out there. As you know, the AK is an awesome platform that is widely used by countless millions of military personnel and civilians around
We’d love to hear your thoughts: Which revolver do you like better? What type of “kit” do you want a “kit gun” for? What is your kit gun of choice? What is your ideal kit gun cartridge/caliber? Versachem 1.5 oz.
Here is the link for the grip tape we used in this video: https://amzn.to/2YdozMy This DIY video will show you how to make homemade Talon-style grips for your polymer frame Glock pistol out of readily-available rubberized grip tape. This simple
Here is the link for the grip tape we used in this video: https://amzn.to/2YdozMy This DIY video will show you how to make homemade Talon-style grips for your polymer shotgun or rifle stock out of readily-available rubberized grip tape. This
Here is the link for the grip tape we used in this video: https://amzn.to/2YdozMy This do it yourself video will show you how to make Talon-style grips for your polymer pocket gun out of rubberized grip tape. This will give
This video tutorial will guide you on how to do a trigger job on a Glock pistol to improve the trigger quality, reduce pull weight, remove grittiness and slop in the take-up , create a crisp break and make a
Here is the link for the Sig Romeo 5 Tread in this video: https://amzn.to/2LuDXTf This video demonstrates how to disassemble and remove the factory folding stock on an AK M70-pattern underfolder [AK-47] and replace it with an M4-style stock using
The following presentation may not be for the faint of heart… especially if you love the 10mm Auto like we do, but live with the assumption that it gives you “.41 Magnum power in a semi-auto”. Being that we are long-time, die-hard fans of the 10mm Auto cartridge, we have always been curious where the 10mm = .41 mag notion originated, having heard the comparison thrown around for years
Today in review, we will take a closer look at the second generation Kel-Tec Sub-2000 [S2K]. This particular variant is the 9x19MM Glock G19 version, which is admittedly a very welcome addition to the S2K family. While the folding, ultralight, pistol caliber carbine [PCC] retains most of the core features that made the original so popular, Kel-Tec has made a number of improvements to the original design, including an accessory rail on the forend, an upgraded front sight and a factory threaded barrel. We will take a look at what is new, what stayed the same, and what we still would like to see in future revisions.
Here are some free downloadable PDF targets size 8.5″ x 11″ that you can print at home. Just remember to uncheck/deselect the “scale to fit media” or “auto-scale” options in your print settings in order to preserve the accuracy of the measurement grid lines.
This video demonstrates the correct [and cheap] way to perform a trigger job on an AR-15 with a standard mil spec trigger. It will guide you through the “what and where” of properly stoning the fire control group [FCG] components with an armorers stone. It also provides a detailed how-to on swapping out the hammer / trigger / disconnector springs for a lighter set using the JP Enterprises Reduced Power Spring Kit [3.5lb].
This video shows how a Ruger MK IV 22/45 LITE functions with the Tandemkross Blast Shield installed.
This is a great video that deserves some attention; a data compilation and analysis of real-world handgun shootings. It examines their effectiveness when weighed against other pistol calibers, and against rifles and shotguns.
This post was compiled to address the incessant light primer strikes that plague the Savage Rascal .22 LR, an otherwise good firearm. This condition is caused by a combination of two firing pin design defects: 1. An excessively wide rim
As you might already know, dry firing certain rimfire arms can do serious damage to internal components such as the firing pin and the breech. Using “dummy rounds” or “snap caps” can help alleviate the risk of doing serious damage to your gun.
This video tutorial shows you how to properly align standard rifle aperture/peep sights. It also gives you precise visual queues on correct sight picture.
Many physicians groups are lobbying Congress for permission and funding to study “gun violence” as a public health issue. That is why the irony of the following is as humorous as it is alarming.
Sometimes folks ask us why we do not include fingerprinting services like some other Utah Concealed Firearm Permit [CFP] instructors do. This article from the Salt Lake Tribune explains the response we have used for years. Poor print quality will get
There are few things more disappointing in life than spending hundreds of dollars on a new concealed carry gun, plus hundreds more on ammo, sights, holsters, etc, just to find out that you don’t really like the gun. In this
Logic would dictate that when an armed, violent maniac is trying to kill you, a reasonable response would be to return fire, reload and repeat as needed. While the world struggles to digest what happened in Paris on Friday, Nov. 13th, 2015, the focus is drawn to a belated effort to end the wave of migrants from Syria into Europe. Unfortunately, this effort fails to address the most fundamental security flaw in the EU…
I have never considered myself to be an environmentalist, but I do love the outdoors. And, I tend to prefer wild lands be as clean as possible. In a recent shooting trip to one of my favorite BLM-managed sites, I couldn’t help but notice how much trash shooters have left in the desert.